What does LG washer error code IE mean?

IE stands for Inlet Error — the washer isn't detecting enough water flowing in within the expected time. Usually a closed supply valve, clogged inlet filter screen, or a failing water inlet valve.

What does Samsung washer error code 4E mean?

4E (sometimes 4E1/4E2) is a water supply error — the machine isn't seeing enough incoming water. Check that both hot and cold supply valves are fully open before assuming a valve or sensor failure.

What does Whirlpool washer error code F5 mean?

F5 (often shown as F5E1 or F5E2) points to a door or lid lock problem — the control can't confirm the door is latched or unlocked properly.

What does GE oven error code F3 mean?

F3 (or F3E0/F3E1) indicates the oven temperature sensor (RTD) is reading open or shorted, so the control can't trust the temperature reading.

What does a dE or dC error code mean on a washer?

dE / dC / DOOR codes almost always mean the washer's door or lid switch isn't confirming a secure, latched close — check for obstructions in the door strike before booking a repair.

Home / Error Codes

What does your appliance's error code mean?

A free lookup for the most common codes on LG, Samsung, Whirlpool, GE, Frigidaire, Maytag and Bosch appliances — washers, dryers, fridges, ranges and dishwashers. Find your code, get the plain-language meaning, then call or text us if it needs a technician.

Call (587) 444-9144 Text a photo of your display

LG Samsung Whirlpool GE Frigidaire & Electrolux Maytag Bosch Kenmore & KitchenAid

LG error codes

Washers & dryers · Front-load and top-load

Code	Appliance	What it means
IE	Washer	Inlet Error — not enough water is flowing in. Check that both supply valves are fully open and the inlet screen isn't clogged.
OE	Washer	Outlet Error — the tub isn't draining in the expected time. Often a clogged pump filter or kinked drain hose.
UE	Washer	Unbalanced load. The washer stopped mid-spin to redistribute laundry — persistent UE can point to a worn suspension or shock.
dE / DE	Washer	Door Error — the door isn't detected as latched. Check for anything trapped in the door seal.
LE	Washer	Motor / locked rotor error — the drive motor is drawing abnormal current, often a bearing or motor control fault.
tE	Washer & Dryer	Temperature sensor (thermistor) error — reading out of range or open circuit.
AE	Dryer	Communication error between the main control and a sub-board.
Er FF / Er dH	Refrigerator	Freezer fan or defrost heater circuit fault — usually needs a hands-on diagnostic to isolate.

Samsung error codes

Washers, dryers & refrigerators

Code	Appliance	What it means
4E / 4E1 / 4E2	Washer	Water supply error — machine isn't detecting enough incoming water. Confirm both valves are open first.
dE / dC	Washer	Door lock error — the door isn't confirmed latched or won't unlock.
UE / Ub	Washer	Unbalanced load detected during spin.
LE / LE1	Washer	Water level sensor (pressure switch) error, or a suspected leak.
SUD / Sud	Washer	Excess suds detected — often a detergent overdose, but recurring Sud errors can mean a drain restriction.
tE1 / tE2 / tE3	Dryer	Thermistor (temperature sensor) circuit error.
HE1 / He1	Dryer	Heater not reaching temperature — heating element or thermal fuse fault.
21 C / 21 E	Refrigerator	Freezer defrost sensor error.
5E / SE	Refrigerator	Water leak sensor triggered in the ice maker / dispenser area.

Whirlpool error codes

Washers, dryers & ranges — also applies to most Maytag and KitchenAid laundry built on the same platform

Code	Appliance	What it means
F1 / F1E1	Washer / Range	Main control board fault.
F5 / F5E1 / F5E2	Washer	Door or lid lock error — control can't confirm latch state.
F7 / E1	Washer	Motor speed sensing fault.
F8 / E1	Washer	Water level (pressure switch) fault, or overfilling.
Sud / SUDS	Washer	Excessive suds detected mid-cycle.
LF	Washer	Long Fill — taking too long to reach water level. Check supply valves and inlet screens first.
PF	Dryer / Washer	Power Failure — a power interruption occurred mid-cycle; usually clears itself, but repeats point to a wiring issue.
AF	Dryer	Airflow restriction detected — check the vent and lint screen before booking a repair.
F3 / F4	Range / Oven	Oven temperature sensor (RTD) reading open or shorted.
F5	Range / Oven	Oven door latch (self-clean lock) fault.

GE error codes

Ranges, ovens & washers

Code	Appliance	What it means
F1	Range / Oven	Runaway oven temperature — the control shuts the oven off as a safety measure.
F3 / F3E0 / F3E1	Range / Oven	Oven temperature sensor (RTD) circuit open or shorted.
F7	Range / Oven	A function key on the control panel appears stuck.
F8	Range / Oven	Analog-to-digital (relay board) fault.
Ld	Washer	Long Drain — the washer is taking too long to drain. Check the pump filter first.
Ub / UE	Washer	Unbalanced load during spin.

Frigidaire & Electrolux error codes

Washers & dryers — Frigidaire and Electrolux share the same control platform

Code	Appliance	What it means
E68 / E6.8	Dryer	Exhaust vent blocked — reduced airflow detected. Clean the vent run before booking service.
PF / E64	Dryer	Power failure during a cycle.
E11	Washer	Water fill taking too long — check supply valves and inlet screens.
E20 / E21	Washer	Drain error — the machine can't pump water out fast enough.
E24	Washer	Drain pump circuit fault.

Maytag error codes

Most modern Maytag laundry is built on the Whirlpool platform — see the Whirlpool table above for F-codes. A few Maytag-specific ones:

Code	Appliance	What it means
Sud	Washer	Too many suds detected — the machine pauses to add rinses.
F9 / E1	Washer	Drain time exceeded — check the pump filter and drain hose.
PF	Dryer / Washer	Power interruption mid-cycle.

Bosch error codes

Dishwashers

Code	Appliance	What it means
E15	Dishwasher	Aquastop / leak sensor triggered — water detected in the base pan.
E09 / E01	Dishwasher	Heating element circuit fault.
E24	Dishwasher	Drain error — check the drain hose and air gap for a blockage first.

Kenmore & KitchenAid

Kenmore appliances are manufactured by several different companies depending on the model — commonly Whirlpool, LG or Frigidaire — so the fastest way to read a Kenmore code is to check the appearance of your control panel against the LG, Whirlpool or Frigidaire tables above. KitchenAid laundry and cooking appliances are built by Whirlpool and use the same F-codes shown in the Whirlpool section; KitchenAid built-in refrigeration is closer to the LG-style "Er" display codes.

Code not listed, or not sure what you're looking at? Send us a photo of the display and we'll tell you what it means before you book anything.

Call (587) 444-9144 Text a Photo

Codes can vary slightly by exact model and production year, and some brands reuse the same code for more than one fault. This page is a starting point, not a diagnosis — a recurring or repeated code should be confirmed by a technician before parts are ordered.